用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
基于GaP光子晶体的平板超透镜设计与研究
Design and research of plate superlens based on GaP photonic crystal
投稿时间:2023-02-26  
DOI:10.3969/j.issn.1005-5630.202302260028
中文关键词:  超透镜  时域有限差分法  超分辨  光子晶体  衍射极限
英文关键词:superlens  finite-difference time-domain method  super resolution  photonic crystal  diffraction limit
基金项目:国家自然科学基金(61975122)
作者单位E-mail
余越 上海理工大学 光电信息与计算机工程学院, 上海 200093  
申桐 上海理工大学 光电信息与计算机工程学院, 上海 200093  
张磬瀚 上海理工大学 光电信息与计算机工程学院, 上海 200093  
郑继红 上海理工大学 光电信息与计算机工程学院, 上海 200093 ji-hongzheng@sina.com 
摘要点击次数: 1840
全文下载次数: 1185
中文摘要:
      超透镜是基于超表面对光场调控的成像器件,由于其具有体积小型化、工艺流程化的优势,在器件轻量化、便携性方面具有很好的应用前景。针对当前市场对透镜的体积需求,使用时域有限差分法模拟了一种新型结构的超透镜,它是基于光子晶体的平板超透镜,尺寸为长2 μm,宽1 μm,工作波长在717 nm可见光波段。该平板超透镜以TiO2波导作为衬底,由Au和GaP两组周期相同的光子晶体呈相切的结构共同蚀刻在TiO2波导上,模拟研究透镜成像效果。此外通过引入一系列不同形状的缺陷,研究其对平板透镜成像结果的影响,结果表明,当缺陷结构为矩形尺寸:Lx = 0.5 μm,Ly = 0.8 μm时,该平板超透镜呈现出最好的成像效果,达到了0.556 λ数值的超分辨,极大地提高了成像质量。未来该平板超透镜在可便携的成像设备,AR,VR以及小型医疗设备等各个领域具有极大的发展潜力。
英文摘要:
      Superlens is an imaging device based on metasurface photoregulation. Due to its advantages of miniaturization and process, it has a good application prospect in the aspects of lightweight and portability. In order to meet the demand of lens volume in the current market, a new type of superlens is simulated by using the finite-difference time-domain method. It is a flat plate superlens based on photonic crystal. The size is 2 μm×1 μm, and its working wavelength is in the visible light band of 717 nm. In this design, TiO2 waveguide was used as the substrate for the plate superlens design. Two groups of Au and GaP photonic crystals with the same period are etched on the TiO2 waveguide, and the imaging performance of the lens is simulated and studied. In addition, by introducing a series of defects with different shapes, the imaging performance of the plate lens is analyzed. The results show that when the defect structure is a rectangular size of Lx=0.5 μm, Ly=0.8 μm, the plate superlens presents the best imaging performance and reaches the value of 0.556λ super-resolution, which greatly improves the imaging quality. The flat superlens has great potential in portable imaging devices, AR, VR, and small medical devices in the future.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭