|
| 基于STM32F4的ABS传感器输出正弦信号测量装置设计 |
| Design of ABS sensor output sinusoidal signal measurement device based on STM32F4 |
| 投稿时间：2022-03-30 |
| DOI：10.3969/j.issn.1005-5630.2023.002.005 |
| 中文关键词: ABS传感器 正弦信号测量 STM32 快速傅里叶变换 蓝牙通信 |
| 英文关键词:anti-lock braking system sensor sinusoidal signal measurement STM32 fast Fourier transform bluetooth communication |
| 基金项目:上海理工大学创新创业项目(SH2021031) |
|
| 摘要点击次数: 1581 |
| 全文下载次数: 1812 |
| 中文摘要: |
| 汽车轮速传感器是防抱死制动系统（ABS）的关键部件之一，其性能的好坏直接决定了ABS性能的高低。磁电式ABS转速传感器的输出近似为正弦信号，通过对正弦信号幅值、频率、有效值的测定，可以分析获得传感器性能。本文以STM32F407为主控制板，以快速傅里叶变换为主要工具，设计了一款数字控制正弦信号测量装置进行各参数测量。经过实验验证，本装置可在5%的误差内精确测量输入信号的频率、有效值、峰值、失真度并还原信号波形。此外，为了便于观测，本设计借助蓝牙通信模块将测量数据同步上传到手机端。 |
| 英文摘要: |
| The automobile wheel speed sensor is one of the key components of anti-lock braking system (ABS), and its performance directly determines the level of ABS performance. The output of the magnetoelectric ABS speed sensor is approximately a sinusoidal signal, and the performance of the sensor can be obtained by analyzing the amplitude, frequency and effective value of the sinusoidal signal. This work takes STM32F407 as the main control board and uses fast Fourier transform as the main tool to design a digitally controlled sinusoidal signal measurement device to measure various parameters. It has been verified by experiments that the device can accurately measure the frequency, effective value, peak value and distortion of the input signal within 5% error and restore the signal waveform. At the same time, in order to facilitate observation, this design uses the bluetooth communication module to synchronously upload the measurement data to the mobile phone. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
