|
| 硅片键合套刻偏差测量技术 |
| Deviation measurement technology for silicon wafer bonding |
| 投稿时间：2021-01-06 |
| DOI：10.3969/j.issn.1005-5630.2021.05.002 |
| 中文关键词: 硅片键合套刻偏差 红外技术 套刻标记 套刻偏差 测量重复性 |
| 英文关键词:silicon wafer bonding deviation infrared technology nesting mark nesting deviation measurement repeatability |
| 基金项目: |
|
| 摘要点击次数: 3510 |
| 全文下载次数: 2637 |
| 中文摘要: |
| 硅片键合套刻偏差是影响三维垂向互连封装工艺的重要指标之一。利用红外光可以高效穿透硅基半导体材料的特性，设计了测量键合套刻偏差的红外检测系统。通过测试光源和相机得到的噪声大小和分布作为仿真误差来源；通过MATLAB对不同尺寸、不同类型的套刻标记成像仿真，得到的测量重复性随采样点增多而减小，并在150个采样点时套刻测量重复性趋于稳定的规律；通过仿真检测系统不同数值孔径和套刻标记线宽，得到了测量重复性随对比度增加而减小的特征。根据仿真结果设计了红外检测系统和套刻标记，测试结果接近仿真数据，得到了10 nm以下的测量重复性，证明了利用红外技术高精度检测硅片键合套刻偏差的可行性。 |
| 英文摘要: |
| Deviation of silicon wafer bonding is one of the most important indices affecting the packing process of three-dimensional vertical interconnection. In this paper, the bonding deviation detection system is designed according to the high transmittance of infrared light on silicon-based semiconductor materials. The synthetic noise level and distribution are obtained as the source of simulation error by testing the light source and camera. By using MATLAB imaging simulation of different sizes and types of nesting marks, it is found that the measurement repeatability decreases with the increase of sampling points and tends to be stable at 150 sampling points. The measurement repeatability decreases with the increase of contrast by simulating the different numerical apertures and the line widths of nesting marks. The infrared detection system and the nesting marks are designed according to the simulation results. The test results are close to the simulation data and the repeatability of measurement below 10 nm is obtained, which proves the feasibility of using infrared technology to detect the bonding deviation of silicon wafers with high precision. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
