用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
基于磁控溅射制备铜基表面增强拉曼散射基底
Fabrication of copper-based SERS substrates by magnetron sputtering
投稿时间:2019-03-30  
DOI:10.3969/j.issn.1005-5630.2019.06.007
中文关键词:  纳米多孔铜膜  磁控溅射  脱合金  表面增强拉曼散射(SERS)
英文关键词:nanoporous copper film  magnetron sputtering  dealloying  surface enhanced Raman scattering(SERS)
基金项目:国家自然科学基金(NSFC61675133);上海市自然科学基金(17ZR1447500)
作者单位E-mail
何煜 上海理工大学 机械工程学院, 上海 200093  
李强 上海理工大学 机械工程学院, 上海 200093  
张玲 上海理工大学 光电信息与计算机工程学院, 上海 200093 lzhang@usst.edu.cn 
潘登 上海大学 材料基因组工程研究院, 上海 200041  
孙群 上海理工大学 光电信息与计算机工程学院, 上海 200093  
摘要点击次数: 2463
全文下载次数: 2315
中文摘要:
      为了提高拉曼光谱仪的探测灵敏度,设计了铜基表面增强拉曼散射(surface enhanced Raman scattering, SERS)薄膜基底。以Cu40Ti60合金为靶材,通过控制磁控溅射参数获得了一系列铜钛合金薄膜,采用脱合金法进一步获得了不同结构的铜基薄膜,系统地研究了不同溅射参数对铜基薄膜的SERS特性的影响,确定了制备SERS基底的最佳溅射参数。脱合金后所得铜膜具有多孔结构,能形成高强度局域电磁场,即SERS“热点”(hotspots),从而表现出优异的SERS增强性能。该基底制备成本低,重复性好,能用于灵敏检测且SERS增强因子可达1.8×107,具有较好的应用前景。
英文摘要:
      In order to improve the detection sensitivity of Raman spectrometer, a copper-based surface-enhanced Raman scattering film substrate was designed. A series of copper-titanium alloy films were obtained by controlling the magnetron sputtering parameters with Cu40Ti60 alloy target. The copper-based films with different structures were systematically studied. The effects of different sputtering parameters on surface enhanced Raman scattering (SERS) characteristics of the copper-based films were investigated. The optimal sputtering parameters for the preparation of SERS substrates were determined. The copper film obtained after dealloying has a porous structure and can form a high-intensity local electromagnetic field, that is, SERS "hotspots", thereby exhibiting excellent SERS enhancement performance. The substrate is low in cost and good in repeatability by magnetron sputtering, and can achieve sensitive detection and SERS enhancement factor up to 1.8×107. It is one of the ideal choices for high performance SERS substrates and has a high application prospect.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭