用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
内渐进镜片加工中的过切判据的研究
Research of the causes of over-cutting on the process of interior progressive addition lenses
投稿时间:2015-11-12  
DOI:10.3969/j.issn.1005-5630.2016.04.010
中文关键词:  内渐进镜片  自由曲面  加工  过切  曲面曲率半径
英文关键词:interior progressive addition lenses  free-form surface  process  over-cutting  surface curvature radius
基金项目:
作者单位E-mail
张佳康 上海理工大学 光电信息与计算机工程学院, 上海 200093  
陈家璧 上海理工大学 光电信息与计算机工程学院, 上海 200093
上海理工大学 医疗器械与食品学院, 上海 200093 
jbchen@163.com 
魏叶飞 上海理工大学 光电信息与计算机工程学院, 上海 200093  
项华中 上海理工大学 医疗器械与食品学院, 上海 200093  
朱天凤 上海理工大学 光电信息与计算机工程学院, 上海 200093  
摘要点击次数: 2672
全文下载次数: 122
中文摘要:
      针对内渐进镜片在加工过程中出现过切的情况,提出一种判断方法。该方法使用双三次样条曲面参数方程计算自由曲面各点曲率半径最小值,通过三维软件对曲面曲率半径进行计算,研究镜片在机床上实现加工的判据。由分析和计算表明,若曲面加工范围内存在某些点的曲率半径小于给定的机床刀具半径,则机床无法加工内渐进镜片的曲面。
英文摘要:
      Some progressive addition lenses are over cut during the processing.This paper proposes a method.It obtains the least value of the surface curvature radius of the free surface by calculating the parametric equation of the double three spline surface.The least value of the surface curvature radius is calculated by a 3D software.We study the reason of lenses why it can be processed.The result indicates that if the surface curvature radius of some points is less than the radius of machine tool,the surface can not be processed.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭