用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
光学元件外径的机器视觉测量技术研究
Research on machine vision measurement technology for measuring optical element diameter
投稿时间:2016-01-25  
DOI:10.3969/j.issn.1005-5630.2016.04.003
中文关键词:  机器视觉  目标提取  亚像素边缘检测
英文关键词:machine vision  target extraction  sub-pixel edge detection
基金项目:
作者单位E-mail
许楠楠 西安工业大学 光电工程学院, 陕西 西安 710021  
刘缠牢 西安工业大学 光电工程学院, 陕西 西安 710021 lcl0123@sohu.com 
摘要点击次数: 3249
全文下载次数: 177
中文摘要:
      基于机器视觉技术,采用平行光投影获取光学元件轮廓图像,通过行扫描提取目标,使用最小二乘线性回归边缘检测方法,将直线边缘定位精度达到亚像素级别,使测量精度达到微米级。实验结果表明,采用机器视觉的非接触测量方法可以实现对光学元件外径的快速准确测量。
英文摘要:
      Based on machine vision technology,we use the parallel light projection to obtain optical element contour image.By line scan to extract target,we use the least squares linear regression edge detection method and achieve the linear edge location accuracy to sub-pixel level so that measurement precision can reach micron level.The experimental results show that the machine vision method of non-contact measurement can achieve fast and accurate measurement of the optical element diameter.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭