用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
一种检测光学元件面形的新方法
A new method for optical component surface shape detection
投稿时间:2014-01-06  
DOI:10.3969/j.issn.1005-5630.2014.04.004
中文关键词:  面形检测  数字刀口检测技术  干涉检测技术  投影检测技术
英文关键词:surface characterization inspection  digital edge detection technology  interference detection technology  projection detection technology
基金项目:
作者单位E-mail
苏海 陕西华星电子集团有限公司, 陕西 咸阳 712099  
刘缠牢 西安工业大学 光电工程学院, 陕西 西安 710021 987517576@qq.com 
穆绵 陕西华星电子集团有限公司, 陕西 咸阳 712099
西安工业大学 光电工程学院, 陕西 西安 710021 
 
摘要点击次数: 4063
全文下载次数: 3569
中文摘要:
      随着光学元件的广泛应用,对光学元件面形检测提出了更严格的要求.目前常用的检测光学元件面形的方法有数字刀口检测技术和干涉检测技术,比较这两种方法的检测原理及优缺点,提出了一种适用于工厂在线检测的三维检测方法——投影检测技术.用该方法的检测原理和关键技术对光学元件进行实验验证,证明了投影检测技术这一新方法具有实际应用价值.
英文摘要:
      Along with the widespread applications of optical elements, the requirements of the optical component surface shape detection become stricter. At present, digital edge detection technology and interference detection technology are two common methods of detecting optical component surface shape. In this paper, a brief introduction about the detection principle is given. The advantages and disadvantages of the two detection methods are discussed. A three-dimensional detection method, called projection detection technology, is proposed, which is appropriate for factory online inspection. This paper also introduces the detection principle and key technology of this method. In addition, by means of the experimental verification, it further proved that the realistic meaning and practical application value of the proposed projection detection technology.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭