用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
嵌入式可编程PDLC驱动电源系统设计
The design of embedded programmable PDLC power-driver system
  
DOI:
中文关键词:  聚合物分散液晶材料  驱动电压  功率放大模块  升压模块
英文关键词:PDLC  drive voltage  power amplifier module  voltage booster module
基金项目:
作者单位
张燕华 上海理工大学 光电信息与计算机工程学院,上海200093 
孙国强 上海理工大学 光电信息与计算机工程学院,上海200093 
翟青林 上海理工大学 光电信息与计算机工程学院,上海200093 
郑继红 上海理工大学 光电信息与计算机工程学院,上海200093 
摘要点击次数: 3278
全文下载次数: 466
中文摘要:
      为了能够驱动聚合物分散液晶材料(PDLC)对光产生电控现象,设计了基于MINI2440的驱动电源及信号采集系统。波形信号先经功率放大模块放大,再给升压模块提升电压,以达到PDLC需要的400 V内可调的驱动电压要求。系统可提供给PDLC正弦波、方波以及三角波。最终实现经过PDLC材料后,输出信号在LCD触摸屏上显示和输出信号数据采集。系统可高效满足PDLC所需的对波形、电压、频率、相位的调节。
英文摘要:
      In order to drive polymer dispersed liquid crystal (PDLC) material to produce electricity to light the phenomenon of control, power supply and signal acquisition system were designed based on the MINI2440. The waveform signal was amplified by the power amplifier module, and the voltage was improved to achieve the required PDLC driving voltage of 400 V adjustable within the requirements by the voltage booster module. System can provide the PDLC sine wave, square and triangle waves. Ultimately through the PDLC material, the output signal on the LCD touch screen display and output signal data were acquired. This system can efficiently meet the voltage, the waveform, the frequency, the phase adjustment which PDLC needs.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭