用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
自动验光仪中调焦光学系统的设计与研究
Design and research of the focusing optical system for the auto refractometer
  
DOI:
中文关键词:  自动验光仪  调焦光学系统  结构参数  Zemax
英文关键词:auto refractometer  focusing optical system  structural parameters  Zemax
基金项目:
作者单位
石文渊 浙江工业大学 理学院,浙江 杭州310023 
隋成华 浙江工业大学 理学院,浙江 杭州310023 
王河林 浙江工业大学 理学院,浙江 杭州310023 
摘要点击次数: 3806
全文下载次数: 625
中文摘要:
      介绍了一种自动验光仪中调焦光学系统。通过研究自动验光仪中调焦光学系统的光学成像特性,首先建立调焦组的移动量与屈光度之间的关系,设计出系统的初始结构参数;然后在Zemax中建立相应的调焦光学模型,通过选取9个典型屈光度对结构参数进行优化;最后对优化结果进行分析与讨论。分析结果表明:所设计的调焦光学系统对-22D,-10D,-5D,-1D,1D,5D,10D这7个典型屈光度进行验光是可行的。
英文摘要:
      A focusing optical system for the auto refractometer is proposed. By studying on the optical imaging properties of the focusing optical system in the auto refractometer, firstly a relationship between the movement of the focusing component and diopter is built, and the initial structural parameters of system is designed. Then, the focusing optical system is modeled by using Zemax software, and 9 typical diopters are selected to optimize the parameters. Finally, optimization results are analyzed and discussed. The results show that it is feasible for the focusing optical system when the typical diopters are -22D, -10D, -5D, -1D, 1D, 5D, 10D.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭