|
| 增益平坦滤光片的设计 |
| Design of gain flattening fiter |
| 修订日期:2003-11-30 |
| DOI: |
| 中文关键词: 增益平坦滤光片,针法膜系设计,遗传算法,隧穿法 |
| 英文关键词:gain flattening filter,needle method of coating design,generic algorithm,tunneling method |
| 基金项目: |
| 林永昌 李芳 刘育梁 辛红丽 |
| 北京理工大学光电工程系,中国科学院半导体研究所集成光学国家重点实验室,中国科学院半导体研究所集成光学国家重点实验室,中国科学院半导体研究所集成光学国家重点实验室 北京100081,北京100083,北京100083,北京100083 |
| 摘要点击次数: 3836 |
| 全文下载次数: 14 |
| 中文摘要: |
| 分析了增益平坦滤光片的工作原理,提出其性能参数和指标要求,并以OIC2001的目标曲线为例,利用针法膜系自动设计并结合遗传算法和隧穿法等膜系优化设计方法,设计出与目标曲线基本一致的膜系结构。 |
| 英文摘要: |
| The principle of gain flattening filter is analyzed and its working parameters and specification is discussed. According to the aiming curve of OIC 2001, the film construction with the curve same as the aim is reported by the combination of needle method, generic algorithm and tunneling optimization method. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|