用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
贴片机系统中贴装头位置图像校准研究
Study on mounting head position calibration in mounter
  修订日期:2002-03-17
DOI:
中文关键词:  表面贴装,视觉定位,位置校准,贴装头,贴片机
英文关键词:surface mount,vision locating,mounting head calibrate,mounting head,mounter
基金项目:上海市重点科技攻关项目资助项目 (2 1A3 65 9)
于新瑞  王石刚  
上海交通大学微电子装备研究中心 上海200030 (于新瑞,王石刚,沈涛)
,上海交通大学微电子装备研究中心 上海200030(关柏青)
摘要点击次数: 2564
全文下载次数: 14
中文摘要:
      贴装头位置校准是贴片机中元件贴装前关键的一步 ,目的是通过上照视觉系统检测贴装头中心以使其与之同心 ,从而保证元件贴装精度。研究出一种采用绕贴装头中心旋转、并等角度分布于圆周上的多幅图像信息 ,根据正多边形几心合一的特点 ,把贴装头中心定位到亚像素级精度 ,实现了高精度贴装头位置校准 ,同时分析了机械传动系统精度对校准过程的影响。
英文摘要:
      The position calibration of the mounting head is a key step in mounting procedure,and its target is to eliminate the position errors between the center of the head and the center of the vision area so as to mount IC accurately.This paper presents a novel approach,using several images which are located in symmetrical circle position.According to the characteristic of multi center overlaped in equilateral polygon,this arithmetic reaches the sub pixel calibrating precision.At the same time,we analyze the error caused by the machine transmission.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭