用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
团状模塑料注射车灯反射镜工艺分析
Injection molding process of bulk molding composition (BMC) making automobile lamp reflector
  修订日期:2001-11-30
DOI:
中文关键词:  团状模塑料,反射镜,料筒温度,螺杆转速,注射压力,注射速度
英文关键词:bulk molding composition,reflector,barrel temperature,screw speed,injection pressure,injection velocity,
基金项目:
陈庆涛  宋结明
上海小糸车灯有限公司 上海201821 (陈庆涛)
,上海小糸车灯有限公司 上海201821(宋结明)
摘要点击次数: 2138
全文下载次数: 13
中文摘要:
      介绍了热固性团状模塑料 ( BMC)注射成型汽车前照灯反射镜的工艺过程 ,确定了 BMC注射成型的料筒温度、螺杆转速、注射压力、注射速度和保压时间等工艺参数。
英文摘要:
      The injection molding process of thermoset plastics bulk molding composition (BMC) made of automobile lamp reflector is presented in the paper. Process parameters are settled such as barrel temperature, screw speed, injection pressure, injection velocity and holding time and so on.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭