用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
塑料光学元件制造
Fabrication of plastic optical component
  
DOI:
中文关键词:  塑料,光学元件,制造
英文关键词:plastic,optical component,fabrication.
基金项目:
杨相利
杭州照相机械研究所!杭州310013
摘要点击次数: 4215
全文下载次数: 11
中文摘要:
      由于光学塑料具有许多杰出的优点 ,因而在照相机、光盘、投影镜头、眼镜等方面获得了日益广泛的应用。塑料光学元件的关键制造技术是模具设计和制造、选择合适的注塑设备、最佳的工艺参数等。为了制作以光盘物镜为代表的高精度非球面塑料透镜 ,就应采用注射压缩工艺抑制变形的成形技术 ,辅之以考虑变形而补偿模具的成形技术。
英文摘要:
      For its striking advantage,optical plastic was used extensively in camera,optical disc,projector lens,spectacle etc.The key technology of fabricating plastic optical component is the designing and fabricating moulds,the selecting proper injection equipment,the optimizing injection technology parameter,and so on.In order to fabricating high precise aspherical plastic lens,especially optical disc lens,we should adopt injection compression forming technology to delimitate deformation,in addition compensating moulds to consider deformation.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭