用户登录
期刊信息
  • 主管单位:
  • 中国科学技术协会
  • 主办单位:
  • 中国仪器仪表学会、上海光学仪器研究所、中国光学学会工程光学专业委员会
  • 主  编:
  • 庄松林
  • 地  址:
  • 上海市军工路516号上海理工大学《光学仪器》编辑部
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55270110
  • 电子邮件:
  • gxyq@usst.edu.cn
  • 国际标准刊号:
  • 1005-5630
  • 国内统一刊号:
  • 31-1504/TH
  • 邮发代号:
  • 单  价:
  • 15.00
  • 定  价:
  • 90.00
车灯接触片检测方法
A Method of Measuring the Contacting Pieca
  
DOI:
中文关键词:  接触片,二维轮郭,CCD
英文关键词:The Contacting Piece, Two Dimensional Outline,CCD,
基金项目:
贺莉清  宋结明
上海理工大学!上海,200093,上海理工大学!上海,200093,上海小系车灯有限公司!上海201800,上海小系车灯有限公司!上海201800
摘要点击次数: 2389
全文下载次数: 15
中文摘要:
      推荐一种检验车灯接触片(弹性零件)二维轮廓的方法,并将本方法与一般投影测量方法进行分析与比较.测量装置以面阵CCD为传感器,将标准模板与接触片同时成象于CCD上,通过视频信号显示于监视器上进行比较。
英文摘要:
      In this article. a method is described that is used to measure the two dimen-sional outline of the coptacting piece of the automobile lamp, and compared to the method ofprojection. In the installation, the sensor is CCD. The image of the contacting piece and thetemplate is transformed into the video signal by CCD and show on the monitor for compari-son.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭